Ystral C 15.000 SL / Conti-TDS-3 LG
Vendu
Caractéristiques
| Fabricant | Ystral |
| Modèle | C 15.000 SL / Conti-TDS-3 LG |
| Année | 1999 |
| Condition | D'occasion |
| Numéro de série | 18451399 |
| Numéro de stock | 1086 |
| Type of Machine | In-Line-Dispersing and Homogenising |
| Motor | 2-speed motor 12.5 kW / 1.460 rpm, 15 kW / 2.915 - 400 V - 23,5 / 29,5 Amp - 50 Hz - 3 Phase |
| Max. speed in rpm | 3.000 rpm |
| Induction rate in kg/min | from paper bag: 2 till 20 kg/min and from big bag / container hopper of silo: 6 till 200 kg/min |
| Maximum concentration non soluble powder | 70% |
| Maximum viscosity in mPas | normal operation: 4.000 mPas and with an additional pump: 50.000 mPas |
| Inlet pressure in bar | 0,1 till 0,4 bar |
| Maximum counter pressure in bar | during powder induction: 0,4 bar and during dispersion/pumping: 3,0 bar |
| Pumping rate in m3/h | maximum (water): 48 m3/h and during powder induction: 20 till 30 m3/h |
| Wokring temperature | Maximum 70 °C for water as a basic liquid |
Description
Inline Disperser with a special rotor-stator system which generates a large negative pressure and absorbs powder, without dust formation and loss-free, directly into the liquid. Ystral, C.15.000 SL / Conti-TDS-3 LG. Powder inlet DN 25 with tri-clamp connection. Liquid supply DN 50 with dairy thread. Dispersion output DN 50 with dairy thread. Product contact parts made of stainless steel 316 (1.4401), water-cooled seal, 2-speed motor 12.5 kW / 1.460 rpm, 15 kW / 2.915 rpm. Previously used in the food industry. Both the motor and the disperser have new bearings and new o-rings, these are original Ystral parts. The grinding gap is 0.7 mm.