We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies. Read more about privacy policy.

UHT Pilot plant GEA Tuchenhagen Dairy Systems GmbH / TDS-Ahaus

Location

Hamburg, Germany

Sold

Specifications

ManufacturerGEA Tuchenhagen Dairy Systems GmbH / TDS-Ahaus
ModelPilot UHT Anlage
Year2005
ConditionUsed
Serial Number36001561
Stock Number1100
Type of MachinePilot UHT line
Capacity50 - 200 liter per hour
ProductsBaby nutrition, max. 3 mm particles in product inlet
Temperature Range4 - 70 - 95 - 120 - 142/150 - 90 - 40 - ± 8 °C
Holding tube3 / 5 / 10 / 20 / 30 / 2x60 seconds @ 100 liter per hour
Ground surface± 600 x 165 x 270 cm

Description

GEA Tuchenhagen Dairy Systems GmbH / TDS-Ahaus pilot UHT plant with an indirect / direct heating module and homogeniser, previously used in a baby nutrition R&D centre.


Indirect unit, skid mounted, 50 - 200 ltr/h, viscocity of product till a max of 50 bar in the line and particals with a maximum size of 3 mm at the product infeed. Heating cycle by tubular heat exchangers (indirect), THE1: ± 4 - ± 70 °C / THE2: ± 70 - ± 95 °C / THE3: ± 95 - ± 120 °C / Heater1: 120 - ± 142 °C / THE4: ± 142 – ± 90 °C / THE5: ± 90 - ± 40 °C / THE6: ± 40 - ± 8 °C. The line is set at 142 °C for the current client but the unit is designed for a temperature up to 150 °C. 2 Leveltanks of 40 liter. Holding tubes of 3 – 5 – 10 – 20 – 30 – 2x60 seconds @ 100 liter per hour.


Direct steam injection module with flash tank, skid mounted, heating cycle from 90/110 till max 149 °C and holding tubes of 3 – 5 seconds @ 100 liter per hour.   

 

Homogeniser, Niro Soavi, NS3006H, max. 200 liter per hour, max. pressure 600 bar, year 2005, motor 5,5 kW - 380/420V - 950 rpm - 50 Hz, ceramic pistons, ball valves, 2 stages.


Including all interconnecting piping, pumps (1x screw / mono pump 0,75 kW, 1x Jung Hyghspin 70 twin screw pump, year 2017 and 2x Grundfoss water pumps), valves, sensors, cabling and stainless steel control panel with controls (Siemens S7-300 PLC) and Siemens Simatic Panel.