Federal 30/10

Fully reconditioned botte filling and closing line for preformed bottles including new controls existing out of:

• 1) Infeed buffer and debagging table: where a pallet of empty bottles can be loaded on a buffer table. From the table the bottles are pushed on to a conveyor automatically by 2 fingers pushing the bottles.
• 2) Bottle rincer: where the bottles are turned upside down and a shot of filtered compressed air is blown into the bottle to clean and remove particles from the bottle.
• 3) A monobloc rotary filler and screw capper (Federal 30/10). The filler has 30 filling heads (level filling), nozzle diameter 26.5 mm for a bottle opening ± 28 mm. With a rotary product hopper that has a level sensor. Valves for CIP and product, CIP counter piece and a self-priming CIP return pump (Alfa Laval). The capper has 10 head screw cap closing units (including unscrambling cap bunker) for standard 38 mm caps with outer diameter approx. 40 mm. Automatic height adjustment by electric motor for different heights of bottle sizes. Machines is completely enclosed in plexiglass cabinets.

The machines are all rebuild with new control panels including frequency converters and new cabling. Rebuild electric motors on filler, new gaskets, V-belts, hoses for compressed air and bearings.

3 Total new format set for 200 ml, 900 ml and 1.8 liter (the 200 ml bottles cannot go over the debagging table).

3 Existing old format sets (incomplete).

Including all inter connecting conveyors between debagging table, rincer and filler.

Documentation, lay-out, P&ID and the electric schemes available.